Bathroom Controller Paloma Gas Water Heater Deluxe

Paloma Deluxe Controller features:

• Allows you to pre-set 2 different water temperatures for general use or for when the bath-fill function is in operation;
• Includes a voice prompt;
• Comes with a bath-fill function to turn off the “hot water” bath tap when the bath has reached the desired level;
• Available for bathroom;
• Bathroom max temperature can be set to 50’C

EZ Link System:

Should you be purchasing 2 x 27 l/min internal geysers to be joined together using the EZ Link system, we do advise you to get a Paloma Temperature Controller to help manage the 2 geysers as 1 system.

Should you purchase 1 internal and 1 external geyser or you will not be joining 2 x 27l geysers size together, you will need 1 controller per geyser.

Installing a Paloma Temperature Controller:

• Do not install the control outside or in any position where it could come into contact with water or steam.
• Ensure control is placed out of reach of children.
• Remote controllers should be installed somewhere convenient such as in the kitchen, laundry room or near the bathroom.
• Up to 3 controllers can be installed per unit, in different rooms of the building, however, they will not act in isolation and all control the temperature for all taps.
• Avoid installing the control near any heat sources such as stoves, ranges or heaters.
• Avoid placing the control in direct sunlight.
• The maximum distance between the gas geyser and the temperature controller is around 20 – 25m.
• Fitting size – twin flex 0.5mm

Warning:

Paloma Temperature Controllers should not be fitted to a gas geyser that is part of a solar water heater system because water at a temperature much higher than the maximum allowed by the controller, can be delivered. Nor can they be fitted to any other make or brand of gas geyser.

Extras:

The Paloma Bathroom controllers need to use Paloma-supplied cable, which is included with the controller. The Kitchen controller can use a cable from another supplier.